ATEN CE790 Digital KVM Extender
- 24×7 remote and on-site support
- Multi-vendor solutions & services
- Local billing in 33+ countries
- Competitive Price
The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.
The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.
* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.
- Remotely access computers on your KVM installation via intranet
- Dual console operation - control your system from both the transmitter and receiver USB consoles
- OSD (On Screen Display) on both the transmitter and receiver units
- Supports GUI operation*
- No software required - an HTTP server is embedded in both units
- Built-in ASIC for greater reliability and compatibility
- USB Keyboard and USB Mouse Ports
- RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
- Audio enabled
- USB overcurrent detection and prevention
- High resolution video - up to 1920 x 1080
- Supports widescreen formats
- Ultra-High quality video mode
- Hot pluggable
- Rack mountable
- Firmware upgradable
- Auto-MDIX - automatically detects cable type
Note:
* The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
** RS-232 serial ports support Tx/Rx/CTS/RTS signals only.
Function | CE790T | CE790R | ||
Connectors | Console Ports | Keyboard | 1 x USB Type A Female (White) | |
Video | 1 x HDB-15 Female (Blue) | |||
Mouse | 1 x USB Type A Female (White) | |||
Speaker | 1 x Mini Stereo Jack Female (Green) | |||
Mic. | 1 x Mini Stereo Jack Female (Pink) | |||
KVM Ports | Keyboard/ Video / Mouse | 1 x SPHD-17 Female(Yellow) | N/A | |
Speaker | 1 x Mini Stereo Jack(Green) | |||
Mic. | 1 x Mini Stereo Jack (Pink) | |||
RS-232 | 1 x DB-9 Female (Black) | 1 x DB-9 Male (Black) | ||
Power | 1 x DC Jack (Black) | |||
LAN | 1 x RJ-45 Female (Black) | |||
Pushbuttons | OSD | 1 x Pushbutton | ||
Select | 1 x Pushbutton | |||
LEDs | Status | 1 (Green / Orange) | ||
Power | 1 (Green / Red) | |||
Emulation | Keyboard / Mouse | USB | ||
Power Consumption | DC5.3V/6.62W | DC5.3V/6.36W | ||
Video | Up to 1920 x 1080 | |||
Environment | Operating Temp. | 0 - 50C | ||
Storage Temp. | -20 - 60C | |||
Humidity | 0-80% RH |