Opengear IP-PDU9108-IEC PDU

The rack mount IP-PDU 9108 PDU controls eight (8) AC power outlets. The PDU can be securely controlled over the network using the web interface or SNMP.

The IP-PDU is an Internet ready device designed and is equipped with an intelligent current-meter (True RMS) that will indicate the total power consumption of a power strip.

The IP-PDU offers an easy set up and user-friendly communication software. This software provides the function that assistant manager to remotely monitor the multiple PDU power consumption to realize the total current power consumption and utilization for the enterprises.

• Built-in web server enables real time remote monitoring of the current consumption of the power strip
• Build-in true RMS current meter
• Easy set up (e.g. the meter can read the IP address directly)
• Secure with SSL support
• Provides audible alarm when the power consumption over the threshold of warning and overload
• Sends email and SNMP traps when the power consumption exceed the trigger value of warning or overload to the PDU
• Supports SNMP and provides MIB for the PDU to be monitored by NMS
• Provides per outlet power protection by the circuit breaker
• Real time individual control of each PDU outlet
• Indicate outlets status with LED
• Supports power on sequence

• USA model
• Output 8 x NEMA 5-15/20R outlets
• Input 1 x IEC320 C20 inlet
• Enclosed IEC320 C19 to NEMA 5-15P Power Cord 3 Meters long
• Protection 1 x 15 AMP Circuit Breaker
• Nominal Voltage 115V
• Frequency 50/60HZ full range
• For 110-127V
  • Total Max output current for per 4 outlets : 15 Amp (UL derated 12 Amp)
  • Use power IN cable with 15A current rating
  • Use power OUT cable with 150A rating for each power outlet
• Regulatory Approvals
• CE, EN 55022 Class A, EN 55024,EN 61000-3-2,EN 61000-3-3
• C-Tick AS/NZS CISPR 22: 2006
• FCC Part 15 Class A, ICES-003