Toggle Nav

IXIa LA-2407 iLink Agg, (16) 10/100/1G IL to (8) SFP VZD Net Optics

In stock
SKU:
LA-2407
  • 24×7 remote and on-site support
  • Multi-vendor solutions & services
  • Local billing in 33+ countries
  • Competitive Price

Fully Configurable Port Mapping
Net Optics iLink Agg combines selected traffic from up to eight 10/100/1000 integrated network taps or 16 10/100/1000 Span ports and directs traffic to the SFP monitor ports.  With fiber SFP modules in the monitor ports, you can use the receive side as a Span input and the transmit side as a monitoring tool output simultaneously, so you can monitor as many as 8 links and 8 Span ports at one time with up to eight monitoring appliances. The iLink Agg supports fully configurable port mapping, enabling aggregation, regeneration, and matrix switching in a single device. Any-to-any and many-to-many port mappings are supported, and any port can be used as an input or an output, or both at the same time.

Configurable for Networt Tap or Span
The model LA-2408 gives you the flexibility of configuring each pair of network ports to function as a passive inline tap, or as two independent ports which can be used as Span network inputs or as monitor outputs. For high security installations, the network ports on model LA-2407 are fixed in an inline tap configuration, ensuring that nothing can interfere with the network traffic under any conditions.

Easy to Configure, Secure and Manage
You can configure the iLink Agg through a command line interface (CLI), GUI and SNMP v3. TACACS+ and RADIUS perform authentication and authorization. RMON traffic statistics are available through the management interface and the SNMP MIBs.

No Dropped Packets
The iLink Agg scans incoming traffic from the network ports on a first-in-first-out basis. The scan rate is optimized to ensure that no packets are dropped, as long as the sum of data rates on the network ports does not exceed the monitoring port capacity of 1 Gbps.

SFP Flexibility
The Net Optics iLink Agg provides connectivity to network links, Span ports, and monitoring tools with dissimilar media interfaces; simply plug the appropriate SFP transceivers into the iLink Agg. You can populate only those ports you need in order to control capital expenses, or provision extra ports to ensure uptime and port availability.

Web UI
Intuitive and simple web based user interface enables quick grpahical device configuration, monioring and management.

Secure Access
The iLink Agg has no IP address on the network, so it is immune to viruses or other attacks. The addressable management port is totally isolated from the network data path, and can be connected to a dedicated management subnet for increased security.

Doing Our Part
Net Optics is dedicated to ensuring user safety, and developing products that are environmentally friendly. The iLink Agg adheres to UL, CB, CSA, and CE safety certifications; FCC and EN Emissions and Immunity Standards; and RoHS and WEEE environmental certifications.

Passive, Secure Technology
  • Virtual Zero Delay circuitry
  • Twenty-four 1 G ports with fully configurable port mapping including Many-to-One, One-to-Many and Any-to-Any port mapping
  • Eight integrated passive inline 10/100/1000 taps
  • RMON statistics for each port through the management ports, locally or remotely
  • Connectivity to network links, Span ports, and monitoring tools with dissimilar media
  • No dropped packets
  • SFP Flexibility
  • Use a monitor port's receive fiber as a Span input and its transmit fiber as a tool output simultaneously
  • Intuitive and simple web based user interface enables quick grpahical device configuration, monioring and management.
Ease of Use
  • LEDs indicate Link, Activity, and Power status
  • Front-mounted connectors ease installation and operation
  • Compatible with all major manufacturers' monitoring devices, including protocol analyzers, probes, firewalls, and intrusion detection and prevention systems

Performance:
No packets are dropped when the aggregated traffic to any monitor port does not exceed the monitor port bandwidth
Latency: 4.5µsec (1Gbps, 64-byte packet)
Virtual Zero Delay: No loss of link during power transitions in most environments
Network Recovery Time: 40ms at 16bps
Hardware Throughput: 24Gbps

Mechanical:
Dimensions: 1.75” high x 19” wide x 17” deep
Weight: 11 lbs (5 kg)

Electrical:
Hot-Swappable Redundant Power Supplies:
AC Input: 96-264VAC, 47-63Hz, 1.18A @ 120VAC
DC Input: -48VDC nominal, -36 to -72VDC, 4.7A @ -48VDC
Consumption: 70W (typical)

Connectors:
Monitoring Port: (8) SFP cages (for output only)
Network Ports: (16) RJ45 10/100/1000
Management Ports: (1) RJ45 RS232 and (1) RJ45 10/100/1000

Management:
CLI local or SSH remote, Web UI, SNMPv3, SNMPv2, SNMPv1, RADIUS, TACACS+, RMON, DHCP

Operating:
Operating Temperature: 0ºC to 40ºC
Relative Humidity: 10% min, 95% max, non-condensing

Non-Operating:
Storage Temperature: -20ºC to 70ºC
Relative Humidity: 10% min, 95% max, non-condensing

Certifications:
Safety: UL 60950, cUL 60950, CE, CB,
Emissions and Immunity: FCC, EN, ICES - 003 Class A
Environmental: RoHS, WEEE, Fully IEEE 802.3 compliant

Warranty:
All Net Optics products come standard with a 1 year manufacturer's warranty
Additional service plan options to extend warranty coverage are available for purchase; see theService Planpage for details.

Custom Solutions
Competative Prices
Global Logistics
24*7*365 Support