Gefen CAT5-1600A USB KVM Extender

Place the Sender unit next to the VGA source. Use the included VGA cable to connect the source to the Sender unit. Optionally connect a local monitor to the Sender unit using another VGA cable. Connect up to two monitors to the Receiver unit with VGA cables. Connect the USB devices to the input and output connectors. For audio, connect a mini-stereo cable between the audio source and the audio input on the Sender unit. Connect a mini-stereo cable between the audio output on the Receiver unit and the audio device. Use two CAT-5 cables to connect the Sender unit to the Receiver unit.

To power-on the units, connect the locking power supplies and plug them into available electrical outlets. The computer can now be controlled from the KVM workstation.

Note:  VGA and Audio can be extended to 1000 feet (300 meters). USB can be extended to 330 feet (100 meters).

• Extends analog video (VGA) and analog audio up to 1000 ft. (300 meters) over two CAT-5 cables.
• Extends USB 2.0 up to 330 feet (100 meters)
• Supports resolutions up to 1920 x 1200
• Supports USB 2.0 at up to 480 Mbps transfer rate
• Reads EDID of both remote and local monitor
• Backward-compatible with USB 1.1 devices
• Green Mode saves power when VGA source is not present
• Supports any Operating System (OS)
• Color, brightness, and focus controls
• Adjustable phase-shift knob for RGB colors
• Locking power supplies
• Rack-mountable