Toggle Nav

APC Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 5.7kW, 208V, (21) C13 & (3) C19

In stock
SKU:
AP8661
  • 24×7 remote and on-site support
  • Multi-vendor solutions & services
  • Local billing in 33+ countries
  • Competitive Price

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Metering-by-Outlet capability

Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Remote Individual Outlet Control
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure
Output
Nominal Output Voltage
208V
Output Connections(21) IEC 320 C13 (3) IEC 320 C19
Input
Nominal Input Voltage
204V 3PH
Input Frequency50/60 Hz
Input ConnectionsNEMA L6-20P
Cord Length1.83 Meters
Physical
Net Weight
7.14 KG
Maximum Height1829.00mm
Maximum Width56.00mm
Maximum Depth51.00mm
Shipping Weight9.41 KG
Shipping Height2038.00mm
Shipping Width162.00mm
Shipping Depth118.00mm
ColorBlack
Environmental
Operating Environment
-5 - 45C
Operating Relative Humidity5 - 95%
Operating Elevation0-3000meters
Storage Temperature-25 - 65C
Storage Relative Humidity5 - 95%
Storage Elevation0-15000meters
Conformance
Regulatory Approvals
cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1
Custom Solutions
Competative Prices
Global Logistics
24*7*365 Support