ATEN OL3000HV Professional Online UPS

In stock
SKU
OL3000HV
$0.00
Aten
Brand: Aten
  • 24×7 remote and on-site support
  • Multi-vendor solutions & services
  • Local billing in 33+ countries
  • Competitive Prices
More Information
Description

The ATEN Professional Online UPS is an exceptional and innovative electrical apparatus that provides emergency power to a load when the input power source, or the main one, fails. The basic technology of an online UPS is the same as in a standby or line-interactive UPS, however, the ATEN Professional Online UPS provides a much greater current of AC-toDC battery-charger / rectifier where the rectifier and inverter are designed to run continuously with improved cooling systems. In all our years of working with computers, we’ve found the vast majority of hardware failures can be directly attributed to the stress hardware components experience during the shut-down and startup process, especially if power surges or blackouts are involved.

With severe weather, the aging electrical grid, and hazards lurk inside users' own walls, their equipment is under constant attack from power problems. Even a brief loss of power, sags, or a momentary surge can ruin users' equipment and destroy irreplaceable data. Desktop computers don’t have batteries built-in like laptops do. If users are working on a desktop during a power outage, the system would come to an immediate halt. Not only would users lose their work, but the process imposes unnecessary stress on their machine. If a UPS is present and a power loss occurs, the batteries in the UPS would keep the power steady and unchanged. The ATEN Professional Online UPS adjusts incoming AC power, provides battery backup to pass through most outages, and saves open files automatically. When power is restored, the UPS begins recharging its batteries.

The Online UPS unit continuously filters wall power through the battery system. Since the attached electronics run completely off the battery (that are always topped off by the external power supply), there is never a single millisecond of power interruption when there is power loss or voltage regulation issues. The Online UPS unit thus acts as an electronic firewall between users' devices and the outside world by stabilizing all the electricity to which users' devices are exposed. The UPS has one USB port and one serial port that allow connection and communication between the UPS and the connected computer. Power management software installed on the connected computer(s) gives IT professionals the tools they need to easily monitor and manage their backup power.

This advanced software allows users to access vital UPS battery conditions, load levels, and runtime information as well as provide unattended shut down of network computers and virtual machines connected to a battery backup during a power event. The ATEN Professional Online UPS offers a different way to access detailed UPS settings and information with an LCD screen. The illuminated LCD screen displays input voltage, battery capacity, and more, and includes a three-button configuration interface and audible alarms for different modes of operation.

Features
  • True double-conversion – output power factor is 1 (maximum), meaning all of the power supplied is being used for productive work and makes work the most effi cient. (*OL1500LV, OL2000LV, OL3000LV are not included due to the UL certifi cation.)
  • Output voltage regulation < 1% – provides higher performance and effi ciency for critical applications
  • Programmable power management outlets – users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to mission-critical devices by shutting down noncritical devices
  • Emergency Power Off function (EPO) – EPO connector at rear panel allows emergency UPS Power Off from a remote location
  • SNMP + USB + RS-232 multiple communications – allows either USB or RS-232 communication ports to work with SNMP interface simultaneously
  • Hot swappable battery design – all potential UPS maintenance, including complete power module exchange, can be performed without powering down connected equipment As long as utility power is on, users can leave the UPS and connected equipment on while replacing the battery
  • ECO mode for energy saving – offers up to 97% effi ciency to cut energy usage and cost. UPS power application via static bypass timely returns to online double conversion when the need arises
  • Provides over-voltage cut-off protection and surge immunity by MOV for full-time equipment protection
  • High power factor charger up to 1000W capacity with very low ripple current when charging battery
  • Multi-functional LCD interface – displays immediate, detailed information on input voltage, battery capacity, power status, battery status, operating status, and assessed backup runtime, etc.
  • Smart battery charger design to optimize battery performance – adjusts charging voltage according to outside temperatures and extends the useful service life of batteries
Specifications
General
UPS Topology Double-Conversion
Energy Saving(max) >96%(ECO)
>91%(AC)
>90%(Batt)
HID Compliant USB Port Yes
Serial Port Yes
SNMP / HTTP Remote Monitoring Yes - Optional SNMP CARD
Input
Voltage 220/230/240 VAC
Input Voltage Range
160-300 VAC ± 5% @ 100% load
110-300 VAC ± 5% @ 50% load
Derate capacity to 80% when the output voltage is adjusted to 200VAC/208VAC.
Input Frequency Range 40 Hz ~ 70 Hz
Rated Input current 14.5A
Input Power Factor
≧ 0.99 @ nominal voltage (100% load)
Cold Start Yes
Plug Type IEC 320 C20
Power cord
6ft (Schuko Plug / UK Plug/AU Plug)
Output
VA 3000
Watts 3000
On Battery Waveform Sine Wave
On Battery Frequency 50/60Hz +/- 3 Hz
Outlets - Total 9
Outlet Type
(8) IEC 320 C13 +(1) IEC 320 C19
Outlets - Battery & Surge Protected 9
Rated Power Factor 1
Crest Factor 3:1
Harmonic Distortion ≦2 % THDi (Linear Load)
≦ 4 % THDi (Non-linear Load)
Voltage Regulation ± 1%(Batt)
Transfer Time(AC to Batt.) 0ms
Transfer Time(Inverter to Bypass) 4ms(ECO)
Battery
Runtime at Half Load (min) 9.79
Runtime at Full Load (min) 3.41
Battery Type Sealed Lead-Acid
Battery Pack Voltage 72V
Battery Size 12V/9AH
Battery Quantity 6
Hot-Swappable Yes
Typical Recharge Time
3 hours recover to 95% [email protected]
charging current.
Max charger current 8A
Extended Battery Module BP72V18AH
Replacement Battery Pack BC72V9AH
Replacement Battery Pack Quantity 1
Physical Properties
Rack Unit 2U
Type Rack/Tower
Dimensions (L x W x H) 8.80 x 43.80 x 63.00 cm
(3.46 x 17.24 x 24.8 in.)
Weight 28.70 kg ( 63.22 lb )
Environmental
Temperature (Operating / Storage)
0–40°C (non-condensing) / -20 – 50°C
Humidity (Operating & Storage)
20–90 % RH / 10% – 95%(No condensing)
Audible noise at 1M from surface of unit Less than 50dB
Certifications
Certifications CE
Approvals RoHS
Package Contents
1x Rack Mounting Kit
1x Rail Slide Kit
1x RS-232 Cable
1x USB Type A to B Cable
4x Power Cable (1xIEC C19/C20+ 1xIEC C19/Schuko+1xIEC C19/UK+1xIEC C19/AU(15A))
1x Tower Stand Set
Downloads
  • OL3000HV Datasheet
  • Write Your Own Review
    You're reviewing:ATEN OL3000HV Professional Online UPS
    Your Rating