ATEN CE790 Digital KVM Extender

In stock
SKU
CE790
$1.00
Aten
Brand: Aten

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.

More Information
Description

The CE790 is a IP based KVM Extender with automatic cable detection (Auto-MDIX) and RS-232 serial functionality that allows access to a computer system from a remote USB console (USB keyboard, monitor, and USB mouse) anywhere on the intranet.

The CE790 improves on previous designs by: 1) the addition of an intuitive On Screen Display (OSD) on both the transmitter and receiver units for easy setup and operation; 2) working over a standard TCP/IP LAN via inexpensive Cat 5e cable, allowing point-to-point, point-to-multipoint, and multipoint-to-multipoint administration without the need for an additional KVM switch; and 3) the addition of an RS-232 port, on both the transmitter and receiver Units - to connect to a serial terminal for configuration, and serial devices such as touchscreens and barcode scanners.
* The CE790 can be installed in point to point, point to multipoint and multipoint to multipoint configurations. Multipoint configurations require a separate purchase - contact your delear for details.

* In multipoint configurations, the IGMP (Internet Group Management Protocol) function of your network switches/hubs should be enabled to avoid deterioration of data throughput. If you do not know how to enable IGMP, please contact your network administrator.

Features
  • Remotely access computers on your KVM installation via intranet
  • Dual console operation - control your system from both the transmitter and receiver USB consoles
  • OSD (On Screen Display) on both the transmitter and receiver units
  • Supports GUI operation*
  • No software required - an HTTP server is embedded in both units
  • Built-in ASIC for greater reliability and compatibility
  • USB Keyboard and USB Mouse Ports
  • RS-232 serial ports** - allows you to connect to a serial terminal for configuration, or serial devices such as touchscreens and barcode scanners
  • Audio enabled
  • USB overcurrent detection and prevention
  • High resolution video - up to 1920 x 1080
  • Supports widescreen formats
  • Ultra-High quality video mode
  • Hot pluggable
  • Rack mountable
  • Firmware upgradable
  • Auto-MDIX - automatically detects cable type

    Note:
    * The CE790 AP and GUI operation instructions can be downloaded from the ATEN website (www.aten.com).
    ** RS-232 serial ports support Tx/Rx/CTS/RTS signals only.
Specifications
Function CE790T CE790R
Connectors Console
Ports
Keyboard 1 x USB Type A Female (White)
Video 1 x HDB-15 Female (Blue)
Mouse 1 x USB Type A Female (White)
Speaker 1 x Mini Stereo Jack Female (Green)
Mic. 1 x Mini Stereo Jack Female (Pink)
KVM
Ports
Keyboard/ Video / Mouse 1 x SPHD-17 Female(Yellow) N/A
Speaker 1 x Mini Stereo Jack(Green)
Mic. 1 x Mini Stereo Jack (Pink)
RS-232 1 x DB-9
Female (Black)
1 x DB-9 Male
(Black)
Power 1 x DC Jack (Black)
LAN 1 x RJ-45 Female (Black)
Pushbuttons OSD 1 x Pushbutton
Select 1 x Pushbutton
LEDs Status 1 (Green / Orange)
Power 1 (Green / Red)
Emulation Keyboard / Mouse USB
Power Consumption DC5.3V/6.62W DC5.3V/6.36W
Video Up to 1920 x 1080
Environment Operating Temp. 0 - 50C
Storage Temp. -20 - 60C
Humidity 0-80% RH
Write Your Own Review
You're reviewing:ATEN CE790 Digital KVM Extender
Your Rating