APC Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 5.7kW, 208V, (21) C13 & (3) C19

In stock
SKU
AP8661
$1.00
APC
Brand: APC

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding.

More Information
Description

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Features

Metering-by-Outlet capability

Individual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.
Remote Individual Outlet Control
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Network Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure
Specifications
Output
Nominal Output Voltage
208V
Output Connections (21) IEC 320 C13 (3) IEC 320 C19
Input
Nominal Input Voltage
204V 3PH
Input Frequency 50/60 Hz
Input Connections NEMA L6-20P
Cord Length 1.83 Meters
Physical
Net Weight
7.14 KG
Maximum Height 1829.00mm
Maximum Width 56.00mm
Maximum Depth 51.00mm
Shipping Weight 9.41 KG
Shipping Height 2038.00mm
Shipping Width 162.00mm
Shipping Depth 118.00mm
Color Black
Environmental
Operating Environment
-5 - 45C
Operating Relative Humidity 5 - 95%
Operating Elevation 0-3000meters
Storage Temperature -25 - 65C
Storage Relative Humidity 5 - 95%
Storage Elevation 0-15000meters
Conformance
Regulatory Approvals
cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1
Write Your Own Review
You're reviewing:APC Rack PDU 2G, Metered by Outlet with Switching, ZeroU, 5.7kW, 208V, (21) C13 & (3) C19
Your Rating